--- title: Tech specs slug: one/general/tech-specs docTags: createdAt: 2026-06-10T18:09:43.959Z --- This page describes the full technical specifications of the Flipper One. Since the device is under active development, specifications may change. ![Flipper One outline](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/c3AmfS5rPX-DtC0UV8Ll__tech-specs-main.png) *** ## Size and weight ⚠️ Final weight is pending — value below is a placeholder. ![Flipper One — front view with dimensions](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/cXhY4NOud-a_mjeiDi4k4_flipper-one-dimensions.png) - **Width:** 155 mm (6.1 inches) - **Height:** 67 mm (2.64 inches) - **Depth:** 40 mm (1.57 inches) - **Weight:** TBD grams (TBD ounces) *** ## Materials ![Flipper One materials](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/uDxAu8FFtVO8Tqswa-b1b_materials-flipper-one.jpg) - **Body:** PC/ABS - **Buttons:** PC/ABS - **Screen:** Gorilla Glass - **Heat sink:** Anodized aluminum - **Bracket:** Anodized aluminum - **Lanyard loop:** Anodized aluminum - **Bumpers:** TPE *** ## Monochrome LCD display - **Resolution:** 256 × 144 pixels - **Grayscale:** 64 levels (6-bit) - **Interface:** QSPI (driven by MCU) *** ## Ports ![Flipper One top and back ports](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/XTiU4vy4iZxEI6FZCmiTu_top-and-back-ports.png) ![Flipper One audio port and USB-C1](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/EDpP0haByIskAmquJqiD9_audio-port-and-usb-c1.png) ![Flipper One Ethernet ports](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/y-YJh_VPFGn8Bt7Y7LlIh_ethernet-ports.png) ![Flipper One MicroSD and SIM slots](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/qRhBBYhUTtI9KXwsJgsaj_microsd-and-sim-slots.png) - **USB-C1:** USB 3.1 (5 Gbps), DisplayPort Alt Mode, USB Power Delivery (input and output) - **USB-C2:** USB 3.1 (5 Gbps), host only, power output - **USB-A:** USB 3.1 (5 Gbps), host only, power output - **HDMI out:** full-size, v2.1, CEC support, 4K @ 120 Hz - **Ethernet:** 2× RJ45, Gigabit - **3.5 mm audio jack:** stereo out and microphone input (TRRS) - **MicroSD card slot:** ⚠️ (UHS-I SDR104 — needs verification) - **SIM card slot:** Nano SIM (4FF), passively connected to M.2 port *** ## Controls ![Flipper One controls](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/gpBOaFHMQVHz9QsxPVUsv_controls-explainer.png "Flipper One controls") - **Touchpad:** fast scrolling, haptic feedback - **App buttons:** 5 buttons below the screen - **Power button:** Power ON / Sleep / OFF, CTRL+ALT+DEL menu, kill app - **5-button D-pad:** directional navigation - **Back button:** return - **App Switcher:** single click = ALT+TAB, double click = extra menu - **Push-to-Talk (PTT) button:** controllable in Linux userspace *** ## Main CPU — RK3576 ![Flipper One CPU and MCU](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/wwFGlTV6MpkVK4CGieJAA_cpu-and-mcu-flipper-one.png) - **CPU:** Rockchip RK3576 - **Cores:** 8 — 4× high-performance ARM Cortex-A72 + 4× efficiency ARM Cortex-A53, up to 2.2 GHz - **GPU:** ARM Mali G52 MC3 — OpenGL ES 1.1/2.0/3.2, OpenCL 2.1, Vulkan 1.2 - **NPU:** 6 TOPS @INT8 — supports int4, int8, int16, FP16, BF16, TF32 *** ## Low-power MCU — RP2350 - **MCU:** Raspberry Pi RP2350B - **Cores:** Dual ARM Cortex-M33 @ 150 MHz + Dual RISC-V Hazard3 @ 150 MHz - **SRAM:** 520 KB - **Flash:** 16 MB *** ## Memory and storage - **RAM:** 8 GB LPDDR5 - **Internal storage:** 64 GB UFS 2.2 - **MicroSD card slot:** ⚠️ (UHS-I SDR104 — needs verification) *** ## Battery and power - **Battery energy:** 24000 mWh - **Battery capacity:** 7000 mAh ⚠️ (not final) - **Charger IC:** TI BQ25792, up to 3.32 A - **Fuel Gauge:** TI BQ28Z620 - **Charging:** via USB-C1 port, USB Power Delivery supported *** ## Wi-Fi & Bluetooth - **Module:** WXT2AM2101 - **Wi-Fi chipset:** MediaTek MT7921AUN - **Wi-Fi modes:** Wi-Fi 6E (802.11ax), 2.4 / 5 / 6 GHz bands, 2×2 MIMO - **Bluetooth:** 5.2 (integrated in MT7921AUN) - **Module interface:** USB 3.0 *** ## Gigabit Ethernet - **Ports:** 2× Ethernet (1 Gbit/s) - **PHY IC:** Realtek RTL8211F-CG *** ## Video output - **HDMI:** v2.1, Full-size connector (Type-A), CEC support, up to 4K\@120 Hz - **DisplayPort:** v1.4 Alt Mode via USB-C1, up to 4K\@120 Hz *** ## Audio - **Codec:** Nuvoton NAU8822 - **Speaker:** ⚠️ needs clarification - **3.5 mm jack:** stereo out + microphone input (TRRS) *** ## M.2 expansion port The M.2 expansion port is at the back of the device, under the Back Plate. ![Flipper One M.2 expansion port](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/mdvI9vpgyMQ99LyHjD2LF_m2-expansion-port.png) - **M.2 type:** Key B - **Supported sizes:** 2230 (via extender), 2242, 3042, 3052 - **Supported thickness:** up to S3 (single-sided modules) - **Interfaces:** PCIe 2.1 x1 / USB 2.0 / USB 3.1 / SATA3 / Serial Audio / UART / I2C / SIM card + eSIM ### M.2 port pinout ![Flipper One M.2 port pinout](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/okplzNF2D9XaQ7Iss1JHn_m2-port-pinout.jpg) | **Description** | **PIN** | **PIN** | **Description** | | ------------------------------------------- | ------- | ------- | ------------------------- | | — | **—** | **1** | CONFIG\_3 | | 3.3V | **2** | **3** | GND | | 3.3V | **4** | **5** | GND | | FULL\_CARD\_POWER\_OFF# (O)(0/1.8V or 3.3V) | **6** | **7** | USB\_D+ | | W\_DISABLE1# (O)(0/1.8V/3.3V) | **8** | **9** | USB\_D- | | GPIO\_9/DAS/DSS (I/O)/LED\_1# (I)(0/3.3V) | **10** | **11** | GND | | CONNECTOR KEY B | **—** | **—** | CONNECTOR KEY B | | GPIO\_5 (I/O)(0/1.8V) | **20** | **21** | CONFIG\_0 | | GPIO\_6 (I/O)(0/1.8V) | **22** | **23** | GPIO\_11 (I/O)(0/1.8V) | | GPIO\_7 (I/O)(0/1.8V) | **24** | **25** | DPR (O)(0/1.8V) | | GPIO\_10 (I/O)(0/1.8V) | **26** | **27** | GND | | PLA\_S2# (I)/GPIO\_8 (I/O)(0/1.8V) | **28** | **29** | PERn1/USB3.1-Rx-/SSIC-RxN | | UIM\_RESET (I) | **30** | **31** | PERp1/USB3.1-Rx+/SSIC-RxP | | UIM\_CLK (I) | **32** | **33** | GND | | UIM\_DATA (I/O) | **34** | **35** | PETn1/USB3.1-Tx-/SSIC-TxN | | UIM\_PWR (I) | **36** | **37** | PETp1/USB3.1-Tx+/SSIC-TxP | | DEVSLP (O) | **38** | **39** | GND | | GPIO\_0 (I/O)/SMB\_CLK (I/O)/(0/1.8V) | **40** | **41** | PERn0/SATA-B+ | | GPIO\_1 (I/O)/SMB\_DATA (I/O)/(0/1.8V) | **42** | **43** | PERp0/SATA-B- | | GPIO\_2 (I/O)/ALERT# (I)(0/1.8V) | **44** | **45** | GND | | GPIO\_3 (I/O)(0/1.8V) | **46** | **47** | PETn0/SATA-A- | | GPIO\_4 (I/O)(0/1.8V) | **48** | **49** | PETp0/SATA-A+ | | PERST# (O)(0/1.8V/3.3V) | **50** | **51** | GND | | CLKREQ# (I/O)(0/1.8V/3.3V) | **52** | **53** | REFCLKn | | PEWAKE# (I/O)(0/1.8V/3.3V) | **54** | **55** | REFCLKp | | NC | **56** | **57** | GND | | NC | **58** | **59** | ANTCTL0 (I)(0/1.8V) | | COEX3 (I/O)(0/1.8V) | **60** | **61** | ANTCTL1 (I)(0/1.8V) | | COEX\_TXD (O)(0/1.8V) | **62** | **63** | ANTCTL2 (I)(0/1.8V) | | COEX\_RXD (I)(0/1.8V) | **64** | **65** | ANTCTL3 (I)(0/1.8V) | | SIM DETECT (O) | **66** | **67** | RESET# (O)(0/1.8V) | | SUSCLK (O)(0/1.8V/3.3V) | **68** | **69** | CONFIG\_1 | | 3.3 V/VBAT | **70** | **71** | GND | | 3.3 V/VBAT | **72** | **73** | VIO\_CFG (I) or GND | | 3.3 V/VBAT | **74** | **75** | CONFIG\_2 | *** ## GPIO pinout ![Flipper One GPIO port pinout](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/2BRxyuZGAT0-17F6rnRPE_gpio-port-pinout.jpg) | **Description** | **PIN** | **PIN** | **Description** | | ---------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------- | ------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- | | 3.3 V Power, up to 2A EFUSE | **3V3** | **GND** | Ground | | **MCU GPIO 40**
PIO
ADC0
PWM8\_A | **M40** | **M41** | **MCU GPIO 41**
PWM8\_B
ADC0
PIO | | **CPU GPIO4\_B4\_D**
SPDIF\_RX0\_M0
I2C3\_SDA\_M0
UART2\_RX\_M1
CAN1\_RX\_M2 | **B4** | **B5** | **CPU GPIO4\_B5\_D**
CAN1\_TX\_M2
UART2\_TX\_M1
I2C3\_SCL\_M0
SPDIF\_TX0\_M0 | | **CPU GPIO4\_B2\_D**
SAI1\_SDO3\_M0
SAI1\_SDI1\_M0
PDM1\_SDI1\_M1
SPI4\_MISO\_M2 | **B2** | **B3** | **CPU GPIO4\_B3\_D**
PWM2\_CH7\_M0
SPI3\_CSN1\_M2
SPI4\_CSN0\_M2
PDM1\_SDI0\_M1
SAI4\_SD0\_M0
SAI1\_SDI0\_M0 | | **CPU GPIO4\_B0\_D**
SAI1\_SDO1\_M0
SAI1\_SDI3\_M0
PDM1\_CLK1\_M1
SPI4\_CLK\_M2
UART5\_TX\_M1
UART6\_RTSN\_M0
UART2\_RTSN\_M1 | **B0** | **B1** | **CPU GPIO4\_B1\_D**
UART2\_CTSN\_M1
UART6\_CTSN\_M0
UART5\_RX\_M1
SPI4\_MOSI\_M2
PDM1\_SDI2\_M1
SAI1\_SDI2\_M0
SAI1\_SDO2\_M0 | | **CPU GPIO4\_A6\_D**
SAI4\_LRCK\_M0
PDM1\_CLK0\_M1
SPI3\_MISO\_M2
I2C4\_SDA\_M1
UART6\_RX\_M0
CAN0\_RX\_M2 | **A6** | **A7** | **CPU GPIO4\_A7\_D**
PWM2\_CH6\_M0
SPI3\_CLK\_M2
SAI4\_SDI1\_M0
SAI1\_SDO0\_M0 | | **CPU GPIO4\_A4\_D**
SAI4\_SCLK\_M0
PDM1\_SDI3\_M1
SPI3\_MOSI\_M2
I2C4\_SCL\_M1
UART6\_TX\_M0
CAN0\_TX\_M2 | **A4** | **A5** | **CPU GPIO4\_A5\_D**
I2C2\_SDA\_M2
UART5\_CTSN\_M1
SPI4\_CSN1\_M2
SAI1\_LRCK\_M0 | | **CPU GPIO4\_A2\_D**
SAI1\_MCLK\_M0
SAI4\_MCLK\_M0
PWM2\_CH5\_M0 | **A2** | **A3** | **CPU GPIO4\_A3\_D**
PWM2\_CH4\_M1
I2C2\_SCL\_M2
UART5\_RTSN\_M1
SPI3\_CSN0\_M2
SAI1\_SCLK\_M0 | | 5V Power, up to 2A EFUSE | **5V** | **GND** | Ground | | CPU USB 2.0 Data+ | **D+** | **D-** | CPU USB 2.0 Data- | *** ## Debug port pinout ![Flipper One debug port pinout](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/Dnyk7XQznd31ZUOVTi9TP_debug-port-pinout.jpg) | **Description** | **PIN** | **PIN** | **Description** | | ---------------- | ------- | ------- | --------------- | | 3V3 ⚠️ MCU POWER | **1** | **2** | MCU RESET | | MCU SWD CLOCK | **3** | **4** | MCU SWD IO | | MCU UART TX | **5** | **6** | MCU UART RX | | MCU GPIO 41 | **7** | **8** | MCU GPIO 40 | | CPU RESET | **9** | **10** | CPU UART0 TX | | CPU UART0 RX | **11** | **12** | CPU GPIO0\_D2 | | CPU GPIO0\_D3 | **13** | **14** | GND |