---
title: Adding 125 kHz cards manually
slug: zero/rfid/add-manually
description: Learn how to add manually and edit 125 kHz RFID card data
image: https://archbee-image-uploads.s3.amazonaws.com/3StCFqarJkJQZV-7N79yY/Ui821JqPzTUS7qfkT4x_3_adding125khzrfidcardspreview2.png
docTags: 
createdAt: 2022-12-25T18:30:23.000Z
---

![](https://api.archbee.com/api/optimize/3GUDYkC5JgUWgo6RW8piO-4U-OBrJRrXL8KRtJBLVox-20241024-181344.png)

You can add new virtual cards to your Flipper Zero without reading a physical card. All you need to do is choose the protocol and enter the card’s data manually. The added card can be emulated or [written](https://docs.flipper.net/zero/rfid/write-data) to a T5577 blank card.

On this page, you’ll learn how to add a new card and edit a card’s data.

***

# Supported protocols

You can manually add virtual cards with the following protocols:

- EM-Micro EM4100
- EM-Micro EM4100/32
- EM-Micro EM4100/16
- HID H10301
- IDTECK Idteck
- Motorola Indala 26
- Kantech IoProx XSF
- AWID
- FECAVA FDX-A
- ISO FDX-B
- Generic HID Prox
- Generic HID Ext
- Farpointe Pyramid
- Viking
- Jablotron
- Paradox
- PAC Stanley
- Keri
- Gallagher
- Honeywell Nexwatch
- Electra
- Securakey
- Guardall G-Prox II
- Noralsy

***

# How to add 125 kHz RFID cards

To add a virtual card, do the following:

::::WorkflowBlock
:::WorkflowBlockItem
Go to **Main Menu** **-> 125 kHz RFID -> Add Manually**.
:::

:::WorkflowBlockItem
Select the protocol you want to use and press %ok%**OK**.
:::

:::WorkflowBlockItem
Enter the card’s data in hexadecimal, then press **Save**.

![](https://api.archbee.com/api/optimize/3StCFqarJkJQZV-7N79yY/yJJLP_jQpK-RioqlVasq7_monosnap-miro-2023-09-12-11-34-22.jpg "Enter the card’s data manually")
:::

:::WorkflowBlockItem
Name the card, then press **Save**.
:::
::::

***

# Editing 125 kHz RFID cards

You can edit data of 125 kHz RFID cards on your Flipper Zero. This applies to data both manually added and captured from physical cards. To edit a card’s data, follow these steps:

::::WorkflowBlock
:::WorkflowBlockItem
Go to **Main Menu** **-> 125 kHz RFID -> Saved**.
:::

:::WorkflowBlockItem
Select the card you want to edit by pressing %ok%**OK**, then press **Edit**.
:::

:::WorkflowBlockItem
Enter new data in hexadecimal, then press **Save**.
:::
::::