---
title: Adding new remotes
slug: zero/sub-ghz/add-new-remote
description: Creation of a virtual remote and pairing with a receiver
image: https://archbee-image-uploads.s3.amazonaws.com/3StCFqarJkJQZV-7N79yY/Q21QTKbn2PtM8PwiLtYQ2_addingnewremotespreview03.png
docTags:
createdAt: 2022-07-28T09:16:12.000Z
---
In case your radio remote is lost, or you want to have one more, you can pair Flipper Zero with your receiver as a remote. The **Add Manually** feature allows you to create a virtual radio remote of the same type as a receiver. You can then pair your Flipper Zero with your receiver as a remote by emulating the created virtual remote.
On this page, you’ll learn how to add a new remote and pair it with your receiver.
***
# How to add a remote manually
**Before** using Flipper Zero as a radio remote, you need to create a virtual remote manually by following these steps:
::::WorkflowBlock
:::WorkflowBlockItem
Go to **Main Menu** **-> Sub-GHz** **-> Add Manually**.
:::
:::WorkflowBlockItem
Select a protocol from the list, then press %ok%**OK**.
:::
:::WorkflowBlockItem
Name the remote, then press **Save**.
:::
::::
### List of supported protocols
| **Protocol name** | **Transmitting frequency, MHz** | **Code type** |
| -------------------------------------------------------------------------------------------- | ------------------------------- | ------------- |
| Princeton\_433 (works with the majority of static code systems) | 433.92 | Static |
| Nice Flo 12bit\_433 | 433.92 | Static |
| Nice Flo 24bit\_433 | 433.92 | Static |
| CAME 12bit\_433 | 433.92 | Static |
| CAME 24bit\_433 | 433.92 | Static |
| Linear\_300 | 300.00 | Static |
| CAME TWEE | 433.92 | Static |
| Gate TX\_433 | 433.92 | Static |
| DoorHan\_315 | 315.00 | Dynamic |
| DoorHan\_433 | 433.92 | Dynamic |
| LiftMaster\_315 | 315.00 | Dynamic |
| LiftMaster\_390 | 390.00 | Dynamic |
| Security+2.0\_310 | 310.00 | Dynamic |
| Security+2.0\_315 | 315.00 | Dynamic |
| Security+2.0\_390 | 390.00 | Dynamic |
***
# Pairing procedure
After the remote is added from the list and saved, you can pair Flipper Zero with your receiver as a radio remote. To pair, you need to activate the pairing mode on your receiver and send a signal from Flipper Zero in accordance with your receiver’s instructions.
:::Iframe{iframeHeight="0" code="
Receivers have different pairing procedures, so read instructions before pairing Flipper Zero with your receiver.
"}
:::
Here you can see the demonstration of a simple pairing procedure:
:::Iframe{code="" iframeHeight="0"}
:::