website logo
HomeShopDocsBlogForum
⌘K
Flipper Zero Documentation
Basics
🐬First start
MicroSD card setup
Firmware update
Pet dolphin
Power
Reboot
Controls
Settings
Sub-GHz
Reading signals
Reading RAW signals
Adding new remotes
Supported Sub-GHz vendors
Frequencies
125 kHz RFID
Reading 125 kHz RFID cards
Adding 125 kHz cards manually
Writing data to T5577 cards
Animal microchips
NFC
Reading NFC cards
Recovering keys with MFKey32
Unlocking cards with passwords
Writing data to magic cards
Infrared
Reading infrared signals
Using universal remotes
GPIO & modules
iButton
Bad USB
U2F (Universal 2nd Factor)
Apps
HID controllers
Flipper Mobile App
Reporting Mobile App bugs
qFlipper
Troubleshooting drivers on Windows
Development
Hardware
Blueprints
Docs powered by
Archbee
Basics
Firmware update

Internal storage repair

Document image


If you can't update your Flipper Zero via the qFlipper application or Flipper Mobile App, full or broken internal storage might be the cause. To resolve this issue, we recommend resetting your Flipper Zero to the factory settings.

Flipper Zero stores data on an inserted microSD card and internal storage. The internal storage has a small capacity and is used for storing the dolphin's level, settings, and information about paired devices. It also stores saved remotes and cards if a microSD card is not inserted. When you insert the microSD card, saved remotes and cards are moved from the internal storage to the microSD card.

On this page, you will learn how to back up your Flipper Zero, reset it to the factory settings, and restore it from a backup.



Back up internal storage data

<div class="info flipper-callout">
    <div class="callout-header"></div>
    If you want to keep the dolphin's level, settings, and information about the paired devices, you can back up  data by following the steps below. If not, proceed to <a href="https://docs.flipperzero.one/basics/firmware-update/storage-repair#s_neK" onclick="next.router.push('https://docs.flipperzero.one/basics/firmware-update/storage-repair#s_neK')"><u>Factory reset</u>.</div>


To save internal storage data, you can back up your Flipper Zero before repairing the internal storage. A backup is a copy of data stored in the internal storage. Data on the microSD card will not be backed up.

To back up internal storage data, do the following:

1

On your computer, run the qFlipper application.

2

Connect your Flipper Zero to the computer with a USB cable.

3

Open Advanced controls and click BACKUP.

You can back up internal storage data via qFlipper
You can back up internal storage data via qFlipper

4

Select the folder where the backup will be saved and click Save.

5

Click BACKUP to save Flipper Zero's internal storage data.

Once you created the internal storage backup, you can reset your Flipper Zero to the factory settings.



Factory reset

You can reset your Flipper Zero to the factory settings in Settings or via the qFlipper application.

<div class="warning flipper-callout">
    <div class="callout-header">All internal storage data will be erased</div>
    The dolphin's level, settings, and information about the paired devices will be erased. <b>Data on the microSD card will be saved.</b>
</div>


Reset the device in Settings

1

Go to Settings -> Storage.

2

Select Factory Reset.

3

Press Erase five times.

<video
    autoplay muted loop playsinline style="width: 100%; margin: auto !important;"
    src="https://cdn.flipperzero.one/Factory_Reset_compressed.mp4"
></video>


Reset the device via qFlipper

1

On your computer, run the qFlipper application.

2

Connect your Flipper Zero to the computer with a USB cable.

3

Open Advanced controls and click ERASE.

Reset the device to the factory reset via qFlipper
Reset the device to the factory reset via qFlipper

4

Click ERASE to start the reset process.

5

When the reset process is finished, click CONTINUE.



Restore data from the backup

Once you have made the factory reset, you can restore your Flipper Zero's data by following these steps:

1

On your computer, run the qFlipper application.

2

Connect your Flipper Zero to the computer with a USB cable.

3

Open Advanced controls and click RESTORE.

Restore internal storage data via qFlipper
Restore internal storage data via qFlipper

4

Select the .tgz backup file, click Open, then RESTORE.

5

When the restoration is finished, click CONTINUE.



If you still can't update your Flipper Zero

  • Reset your Flipper Zero to the factory settings without restoring data from the backup.
  • Switch your device to Recovery mode and repair the firmware of the device. -> Firmware recovery.





Updated 11 Sep 2023
Did this page help you?
PREVIOUS
Firmware update
NEXT
Firmware recovery
Docs powered by
Archbee
TABLE OF CONTENTS
Back up internal storage data
Factory reset
Reset the device in Settings
Reset the device via qFlipper
Restore data from the backup
If you still can't update your Flipper Zero
Docs powered by
Archbee

Community

Kickstarter Habr.com Discord Forum Blog

For developers

Documentation GitHub Design Guide

Distributors

Lab401 Joom How to buy Become a Partner

About

Contacts Jobs Compliance Company Abuse Report Privacy Policy

Copyright © 2023 Flipper Devices Inc.