Flipper Zero tech specs

﻿
Take a closer look at the tech specs of your Flipper Zero and explore its hardware capabilities.
﻿
Body
﻿
Materials: PC, ABS, PMMA
﻿
Size and weight
﻿
Height: 40.1 mm (1.58 inches)
Width: 100.3 mm (3.95 inches)

﻿
Depth: 25.6 mm (1.01 inches)
Weight: 102 grams (3.6 ounces)
﻿
Display
﻿
Type: Monochrome LCD
Resolution: 128x64 pixels
Controller: ST7567
Interface: SPI
Diagonal size: 1.4“
﻿
Buttons and connectors
﻿
﻿
Microcontroller unit
Model: STM32WB55RG﻿
Application processor: ARM Cortex-M4 32-bit 64 MHz
Radio processor: ARM Cortex-M0+ 32-bit 32 MHz
Radio: Bluetooth LE 5.4, 802.15.4, and proprietary
Flash: 1024 KB (shared between application and radio)
SRAM: 256 KB (shared between application and radio)
﻿
Sub-1 GHz module
Transceiver: CC1101﻿
TX power: -20 dBm max
Frequency bands (depends on your region):
315 MHz
433 MHz
868 MHz
915 MHz
﻿
NFC
Transceiver: ST25R3916﻿
Frequency: 13.56 MHz
Supported cards:
ISO-14443A/B
NXP MIFARE Classic®, Ultralight®, DESFire®, etc.
FeliCa™
HID iClass (Picopass)
NFC Forum protocols
﻿
RFID 125 kHz
Frequency: 125 KHz
Modulation: AM, OOK
Coding: ASK, PSK
Supported cards:
EM-Micro EM4100
HID H10301
IDTECK Idteck
Motorola Indala 26
Kantech IoProx XSF
AWID
FECAVA FDX-A
ISO FDX-B
Generic HID Prox
Generic HID Ext
Farpointe Pyramid
Viking
Jablotron
Paradox
PAC Stanley
Keri
Gallagher
Honeywell Nexwatch
Electra
Securakey
﻿
GPIO
13 I/O pins available to user on external 2.54 connectors
3.3 V CMOS Level
Input 5 V tolerant (See AN4899)
Up to 20 mA per digital pin
﻿
Infrared
RX wavelength: 950 nm (±100 nm)
RX carrier: 38 KHz (+/-5%)
TX wavelength: 940 nm
TX carrier: 0-2 MHz
TX power: 300 mW
Supported protocols:
NEC family
Kaseikyo
RCA
RC5, RC6
Samsung
SIRC
﻿
iButton 1-Wire
Supported protocols:
Dallas DS199x, DS1971
CYFRAL
Metakom
TM2004
RW1990
﻿
Battery
Battery type: Lithium polymer battery (LiPo)
Battery capacity: 2100 mAh
Battery life: up to 28 days
Operating temperature: 0° to 40° C (32° to 104° F)
﻿
MicroSD card
Maximum capacity: up to 256 GB
Recommended capacity: 2-32 GB
Interface type: SPI
Read/Write speed: up to 5 Mbps
﻿
USB
Connector type: Type-C
Standard: USB 2.0
Data transfer speed: 12 Mbps
Maximum charging current: 1 A
﻿
Bluetooth LE 5.4
TX power: 4 dBm max
RX sensitivity: -96 dBm
Data rate: 2 Mbps
﻿
Buzzer
Frequency: 100-2500 Hz
Sound output: 87 dB
Type: Coin
﻿
Vibration motor
Force value: 30 N
Speed: 13500 rpm
﻿
In the box
Flipper Zero
USB-C to USB-A cable
Documentation
Sticker
<div class="info flipper-callout">
    <div class="callout-header"></div>
    Flipper Zero doesn’t come with a microSD card, so you’ll need to purchase one separately.
</div>
<div class="info flipper-callout">
    <div class="callout-header"></div>
    Flipper Zero doesn’t come with a microSD card, so you’ll need to purchase one separately.
</div>
﻿
﻿
﻿
MIFARE, MIFARE Ultralight, MIFARE Classic, and DESFire are registered trademarks of NXP B.V.
Updated 25 Oct 2024
Did this page help you?
Wi-Fi Developer Board schematics
Flipper Zero schematics