Network

this section covers network connectivity testing and validation for flipper one wi fi built in wifi based on mediatek mt7921aun chip, wi fi 6e (802 11ax) and bluetooth 5 2 chipset primarily used in high performance usb wireless adapters like the alfa awus036axml it supports 2 4 ghz, 5 ghz, and 6 ghz bands access point mode classic wi fi access point mode used in wi fi routers can we use different bands independently? for example configure 5ghz as ap and 2 4ghz as sta?❓ configure access point on each band (2,4 ghz, 5 ghz, 6 ghz) measure speed with iperf3 on each band repeat with different wpa/open settings client (station) mode client (sta) mode, where device connects to wi fi access point usally laptops and smartphones are wi fi clients we need to test simultanious work ap and sta modes on different and same bands connect to wi fi access point as client mease speed with iperf3 repeat test on all bands (2,4 ghz, 5 ghz, 6 ghz) test simultanious work with ap mode monitor mode monitor (promiscuous) mode can capture all data on specific channel switch wi fi card to monitor mode dump traffic on each bands try to decode traffic pmkid sniff perform rsn pmkid sniff from real access point bluetooth our bleutooth and bluetooth low energy are integrated in wi fi chip bluetooth speaker (master) play sound from flipper one on bluetooth speaker connect bluetooth speaker to flipper one play sound bluetooth speaker (slave) flipper one as bluetooth speaker start advertising as bluetooth speak from flipper one (using bluez?) connect flipper one as bluetooth speak to smartphone play music on smartphone, listen on flipper one via internal speaker, 3,5 audio, hdmi out